Behringer Ultra-dyne Pro DSP9024 Bedienungsanleitung PDF herunterladen (Seite 14)

ULTRA-DYNE PRO DSP9024

Use the softkey A (CLONE) to copy the parameters of the selected frequency band to any or all other frequency

bands of the given channel. The settings are also copied to all bands of the other channel when in stereo mode

(setup level 2). The message “COPY BAND X TO ALL BANDS” will be displayed. Use the Up and Down cursor

keys to select whether the parameters of the current band should be copied to all other bands (ALL BANDS)

or to a specific band (BAND X).

2.2.7 Tube Simulation

Press the softkey D (TUBE) in the <PROCESS> menu to access the <TUBE> menu.

Fig. 2.8: <TUBE> menu

Use this menu to set up the Exciter and Tube Simulation. Please refer to Table 2.2 for the structure and the

meanings of the abbreviations. Softkey D (A/B) allows you to compare the current setting with the settings of

the program as it was loaded. The B in the pictogram is displayed in bold whenever you modify a loaded

program. If you are not satisfied with the new setting, you can return to the original program by pressing

softkey D a second time and trying a new setting from there. As soon as you change a value, the B in the

pictogram will once again be displayed in bold. Upon loading a new program, neither A nor B will be high-

lighted as long as no changes have been made.

Display Function Parameter Range Default Value

EXC Exciter Process 0 to 100 0

O/E Exciter Odd/Even 1/19 to 19/1 10/10

PRC Tube Process 0 to 100 0

TYP Tube Type 12AX7, 12AY7, EL34, EL84 12AX7

Tab. 2.2: Fader functions in the <TUBE> menu

2.3 METER mode

Press the Meter key to enter the METER mode.

Fig. 2.9: METER mode

This mode displays the input and output levels of all frequency bands (ascending from left to right) and the

overall levels of the two channels. Information is also shown regarding level changes made by the ULTRA-

DYNE PRO. Gain reductions are displayed as a small bar extending downward from the 0 dB mark. It is

possible to activate the VIRTUOSO mode while in METER mode by pressing softkey A (see 3.4). Softkey D

toggles between the display of the input and output levels. IN or OUT are highlighted accordingly.

2. OPERATION

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 45 46

Keine Kommentare

Behringer Ultra-dyne Pro DSP9024 Bedienungsanleitung Seite 14