Behringer SRC2000 Bedienungsanleitung PDF herunterladen (Seite 13)

EURORACK MX1804X

Although the 2-track output is primarily designed for recording, it can also be used as a PA feed, or as a send

to the input of your sampler. Depressing on the rear panel will lower the level at the XLR connectors by

20 dB.

2.4.6 Monitor section

Though most of you will want to audition the main mix most of the time there are exceptions. These

include the Alt 3-4 bus and 2-track playback .

A single volume control sends the level to the headphones and main monitors. The bargraph meter

shows the level of the chosen signal. You can connect your headphones to the headphones connector on

the front panel.

The output signal of the main mix remains untouched when you choose different sources for monitoring.

If you want to audition external sources very often, you could do worse than connect your 2-track input to a hi-fi

pre-amp, allowing you to monitor a variety of extra sources such as vinyl, cassette recorder, CD player, etc.

2.4.7 Alt 3-4 output

By depressing the MUTE/ALT 3-4 button a channel’s output will be routed to the Alt 3-4 output instead of

the main mix.

Level to the Alt 3-4 outputs (TRS connectors on the back panel) is adjusted by the fader . Use to have

the signal PFL-ed ( and up).

Alt 3-4 is likely to bewilder newcomers. We want to illustrate how this feature may be used most effectively.

Su/jointfilesconvert/360498/bgroups are commonly used as a mixing aid both live and in the studio, e.g. to control the outputs from all

drum channels with just 1 or 2 submaster faders. They are also used to route to multitrack recorders.

There are no fully-fledged su/jointfilesconvert/360498/bgroups on the MX1804X. However, the Alt 3-4 bus offers you a second independent

stereo submix with its own submaster stereo fader. Combining the Alt 3-4 outputs with the main mix may be

effected by pressing the switch ALT 3-4 TO MIX . To take advantage of the extra routing option you should

use the possibility to send signals to the Alt 3-4 outputs .

By depressing the ALT 3-4 PFL switch you can control the Alt 3-4 signal separately.

+ Remember that when Alt 3-4 is in use, you do not have a channel mute facility on your desk:

you will have to pull down the fader to silence any channel.

2.4.8 Graphic equalizer

The graphic equalizer processes the main mix signal. This way you can adapt the main mix signal to the

room acoustics or your personal taste. Each individual frequency band has up to 10 dB boost or cut. You can

engage the equalizer with the EQ IN switch , this is indicated by the illumination of the faders.

2.4.9 Digital effects processor

A special feature of the MX1804X is its integrated effects processor, which supplies the same quality, as our

well-known 19" effects processor VIRTUALIZER. This effects module offers 32 different standard effects like

reverb, chorus, flanger, delay, pitch shifter and various combination effects. With the FX sends in each

channels in combination with the FX master send you can feed the signal to the effects processor. Make

sure that the LED level display on the effects module always displays a sufficiently high level, without the

CLIP LED lighting up. With the two UP and DOWN buttons you can choose the desired preset. The

rate of change can be accelerated by pressing the opposite button while holding down the first. In order to

activate the selected preset, you press the ENTER button . The display shows the activated preset

number. You can choose the appropriate preset from the list to the right of the level display of the effects

module. By using the FX PROCESSOR DIRECT IN inputs , you can also connect an external signal

directly with the effect processor.

2. OPERATION

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 26 27

Kommentare zu diesen Handbüchern

Keine Kommentare

Behringer SRC2000 Bedienungsanleitung Seite 13

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Audioverstärker Behringer SRC2000