Behringer MIDI FOOT CONTROLLER FCB1010 Bedienungsanleitung PDF herunterladen (Seite 7)

MIDI FOOT CONTROLLER FCB1010

1.3 Control elements

1.3.1 Front panel

Fig. 1.1: Front panel control elements

The foot switches 1 through 10/0 allow you to select PRESETS, program your FCB1010 and enter

data in programming mode.

The UP/DOWN switches are used to scroll through the various BANKS and programming levels. In

programming mode, UP and DOWN are your ENTER and ESCAPE keys respectively.

+ When DIRECT SELECT mode is activated (see chapter 2 PROGRAMMING THE FCB1010), the

UP/DOWN switches are no longer needed for BANK selection and are free to perform a special

function: in the GLOBAL SETUP menu you can program them to control the SWITCH RELAYS

(UP: SWITCH 1 RELAY, DOWN: SWITCH 2 RELAY). In this case, you can toggle between the

preprogrammed SWITCH settings, each time you step on these switches.

EXPRESSION PEDAL A. Allows you to change controller values continuously. In programming mode,

the pedal is used for data entry.

EXPRESSION PEDAL B. Allows you to change controller values continuously.

STATUS-LEDs. The yellow LEDs display the current status of the PRESET programming or GLOBAL

SETUP functions.

LED-Display. Informs you about the currently selected BANK/PRESET number. In programming mode,

it displays any value changes.

1. INTRODUCTION

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

Keine Kommentare

Behringer MIDI FOOT CONTROLLER FCB1010 Bedienungsanleitung Seite 7