USING THE BEHRINGER BCF2000 WITH ACID | 1OverviewUsing the Behringer BCF2000 with ACIDThe Behringer BCF2000 is fully supported by ACID® software and l

2 | OVERVIEWHardware setupYou can use the Behringer BCF2000 with ACID after you have installed the appropriate USB driver, firmware, firmware update u

USING THE BEHRINGER BCF2000 WITH ACID | 3Configuring ACID to use the Behringer BCF20001.Open your ACID project.2.From the Options menu, choose Prefere

4 | OVERVIEWe.From the MIDI input and MIDI output drop-down lists, choose BCF2000.5.Click OK in the Configure Mackie Control dialog to close it.6.Clic

USING THE BEHRINGER BCF2000 WITH ACID | 5Push buttonsInput+Store Displays the effects for each track.Note: Turning the knobs displays what effects are

6 | OVERVIEWAssignable buttonsKnobsFadersThe faders control the following in your project:•The track volume level. • The automation envelope on the tr

USING THE BEHRINGER BCF2000 WITH ACID | 7Preset buttonsThe Preset buttons allow you to move left or right through the BCFview virtual display to expos

8 | OVERVIEW4.To add a volume, pan, or mute envelope, do the following:a.To add a volume envelope (purple), move the track fader.b.To add a pan envelo

USING THE BEHRINGER BCF2000 WITH ACID | 9Fader automationAnother question that comes up often is, “Why aren’t the faders following the envelopes?” The