Behringer Minimix MIX800 Schnellstart Anleitung PDF herunterladen (Seite 5)

(EN) Step 2: Controls

MINIMIX MIX800 Controls

(1) (2)

(5) (6) (8) (10) (11)(3)

(4) (7) (9)

(12) (15)(13) (14)

(1) MIC INPUT 1/2. 1 or 2 microphones

can be connected using these

¼"jacks.

(2) MIC LEVEL 1/2. The MIC LEVEL

control adjusts the level of the

microphonesignal.

(3) CLIP. When the Clip LED lights

up, distortion may occur in the

microphone input of the MIX800.

(4) EQ LOW. The EQ LOW control

allows you to raise or lower the

low-frequency content of the

microphone signal.

(5) EQ HIGH. With the EQ HIGH

control, you can raise or lower the

high-frequency content of the

microphone signal.

(6) ECHO/REVERB. The MIX800

allows you to add an eect to the

microphone signal. When the

ECHO/REVERB button is pressed in,

you can add REVERB to the signal.

When the button is pressed out,

theECHO eect is active.

(7) FX LEVEL. The FX LEVEL control

determines the amount of eect

that is added to the master signal.

(8) IN/OUT. Press the IN/OUT button to

activate the Voice Canceller in the

signal path. This lter circuit allows

you to remove the vocals almost

completely from a recording.

(9) OUTPUT LEVEL. Set the volume

of the output signal with the

OUTPUTLEVEL control.

(10) LED DISPLAY. The LED display

is for monitoring the input level.

Itcomprises 6 LEDs. When the Clip

LED lights up, distortion may occur

in the MIX800 output. Reduce

the output level with the OUTPUT

LEVEL control (9).

(11) � SWITCH. The � switch turns

your MINIMIX MIX800 on and o.

(12) Use the 9 V jack to connect the

power supply delivered with

theunit.

(13) These connectors are the

unbalanced cinch outputs of

theMIX800.

(14) These connectors are the

unbalanced cinch inputs of

theMIX800.

(15) SERIAL NUMBER.

Check Out behringer.com for

Full Manual

8 MINIMIX MIX800 9 Quick Start Guide

1 2 3 4 5 6 7 8 9 10 11 12 13

Kommentare zu diesen Handbüchern

Keine Kommentare